Stephen, Thanks for the post, gotta love this enjoyable sparky chat.....Your experience is certainly appreciated, at least by those of us who are sparkies lol
You say
"Really the outlet having two sets of screws is what its made for, to string one to another."
Im NOT agreeing or disagreeing or arguing but with all due respect to educate some here who may not be aware (electricians and engineers will most likely and maybe you also) of this procedure, PLEASE BE ADVISED
Theres yet ANOTHER POSSIBLE REASON for those two sets of screws!!!!!!!!!! ITS SO YOU CAN BREAK OFF THE TIE/JOIN TAB AND FEED THE TWO (of a duplex receptacle) FROM INDIVIDUAL BREAKERS/CIRCUITS Such is whats referred to as a "multi wire branch circuit".
How it works is you can use just a single Neutral (GrounDED conductor) and two hot phase wires L1 & L2 so the top outlet is on one 20 amp circuit (one of the 2 screws) and the other bottom outlet (the other of the 2 screws) is on another 20 amp circuit yet one Neutral can suffice for BOTH. The 2 branch circuits are fed with a two pole circuit breaker with tied handles so if one is off both are. There are reasons for and aganst this but Im not going to go there now, Im not wanting to sTART a fight or argument, just to educate some who may not be aware of this particular reason and method of having two not just one screw.
NOTE this was NOT my usual method of specifying, I didnt use many multi wire branch circuits, theres a time and place for them. I have already voiced my preference opinion of wiring and others have done likewise, this post is NOT about any of that or tended to re hash it or whats best, the poster has made his choice which I respect regardless if it agrees with my method or not. THIS WAS TO EDUCATE ANOTHER POSSIBLE REASON EXISTS FOR HAVING TWO SCREWS.
God Bless yall, keep safe, were headed to see Annie with the son whose comin home for Christmas from San Diego and the Daughter form Austin TX woooooooo hoooooooooo
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.