Posted by toadady on June 15, 2011 at 09:12:10 from (174.125.57.56):
was not a good day for brush hogging, the bolt that held the pin for the drawbar pizzadeered and let the drawbar slip out, then the blades from the hog came around and whacked it, broke the casting that holds the front of the drawbar, and bent the stump jumper up on one blade end, when I heard the banging and clanging I shut the hog off and raised the lift, only it had threw the bar up ontop of the deck and when i raised it up it front of the hog got bent, so I loaded it up and took it to the shop,
i used the 'yoder forked truck to lift it up on it's nose
on it's nose with everything removed chained to "put-put" the old lift
output shaft seal was leaking as usuall , glad i went ahead and removed the gear box,
the stumhumper in the press i built back in highschool shop class
i removed the 'jumper by drilling two holes and tapping them to 1/2nf thread then used my T-bar puller and it came off like butter, and all the bolts that held the gear box on were loose, but it's not bad for a $500. craigslist find
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.