Farmall & IHC Tractors Discussion Board |
Steering arm Super A
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hendrik on January 13, 2001 at 14:46:47 from (62.100.3.116):
After 3 weeks of trying to remove the steering arm of my '48 Super A (ser. number 261313) I'm at wits end. The thing simply doesn't move at all. I used a special pulling device, applied a propane torch and hammered on it while under tension from the puller. The Super A has the old style tie rods, with the ends bent upwards and ending in a ball. Which type of steering arm do I have??? The vertical shaft does NOT have a square end; it has a (woodruff?) key in it. If I'm reading my parts book correctly my steering arm has part number 356 554 R1 and the vertical shaft has a TAPERED end. Is that correct? (I have an adjustable front axle but it is NOT the heavy duty type.) Any and all help in getting the arm off the shaft will be greatly appreciated! Thanks, Hendrik
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|