Farmall & IHC Tractors Discussion Board |
American Bosch PSB Help
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dana J on January 07, 2001 at 11:08:57 from (204.248.168.75):
I know this is the Farmall/IH forum, but I tried this post in oher discussions areas and got one respone ! You guys seem to respond much better (yes I am succking up: I need help !) So here is the story (and yes, I do own a 51 IH M that is much easier to work on !) Bought a Massey 44d recently with a an American Bosch PSB pump. Supposedly the previous owner replaced a fuel line just before I got it and then could not get it started. I bleed all lines and checked that I have fuel pumping on the return side when I turn it over, but am getting nothing at the injectors. The American Bosch PSB pump has the stop valve built into it: pushing the throttle all the way forward shuts the fuel off. The throttle linkage connects to the PSB via a shaft & collar. Could this be the problem maybe ? It sure acts as though the fuel is shut off. Also, I can operate the hand primer forever and never feel any resistance. Shouldn't some pressure build up after priming by hand for ten minutes ? Is there any place to get any documentation on these pumps ?
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|