Farmall & IHC Tractors Discussion Board |
The Super A started - need help now!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by BIG on September 25, 2000 at 07:19:19 from (63.25.119.31):
The Super A I have been working apparently had a faulty magneto. Put an old spare on it and it cranked and runs but needs a carb rebuild and needs to be timed. How, specifically, do you time it? I see that the magneto "pivots" from a bolt at its bottom and the adjustment is at the top. what procedures do I need to take to set it? Is it best done by loosening these 2 bolts just enough that you can turn the magneto by hand then crank the tractor and adjust by ear while it's running or what? Thanks for the suggestions. Also I need a carb kit to fit it, if anyone has one or knows a good place to get one let me know. It has a Zenith carb with the following numbers on it: 352377R91 and 10522. The tractor is serial #260001.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|