Posted by jtbartlett on September 02, 2011 at 19:28:26 from (71.169.148.251):
I am plumbing a new idea loader on a 1953 super M. I thought the loader arm pistons were single acting-gravity return since there were not ports on both ends of the cylinders. I found this picture on the web which is exactly the same loader and pistons. I am seeing 2 hoses plumbed to the 2 ports near the piston clevis. originally I was thinking one port was hydraulic and the second port was a vent but I"m not understanding how this is plumbed correctly. Is anyone familiar with this type of piston and how should I plumb it? Now, if it is a single acting piston, how do I plumb it through my gresen valves? I have open center 2 way valves to run the bucket (2 way cyl.) the loader (1 way cyl. maybe) and 3pt (2 way cyl.) Is it OK to deadhead the hydraulics through the valve to operate the 1 way loader cylinder return or do I need to run a circuit? Sorry if the description isn"t very clear, I"ve never set up tractor hydraulics before. Here is a link to the picture and I"ll also try to attach it to this post.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.