Posted by IH fan on June 12, 2011 at 04:30:52 from (99.103.251.210):
In Reply to: farmall 240 posted by Jim in Michigan on June 11, 2011 at 13:36:53:
pheel said: (quoted from post at 15:36:53 06/11/11) the 240 has the same appearance which i want, i don't want a large machine, and i like unique projects.
the question is is the 240 a good tractor, is it easy to find used parts, the reason i am using a cletras trac is it is easy to find parts.
If I'm not mistaken, the Farmall 240 is more rare than the International 240U... something like 3500 to 10,000. Some of the parts are common between them, and some are common with the 230 and probably as far back as the Super C, but the farther back you go, the less they are the same.
The basic tractor should be pretty good, but is outdated by the time they were introduced in '58. Main complaints I have are no live pto when most tractors had it by then, and only a 4 speed tranny. My 240U 3 point does not respond well, but that may just be my tractor.
This post was edited by IH fan at 04:34:19 06/12/11 2 times.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.