Posted by ARF on December 29, 2010 at 10:19:49 from (69.174.58.60):
Hello guys I have a long story with a question at the end, About 5 years ago I was seeing quite a bit of anti-freeze in my spring and fall oil changes on my 1940 H Farmall. I took off the head had it magna fluxed and found it had several cracks. I paid about $400 to get the head welded up. Everything seemed good till the last two oil changes when I noticed the return of the anti-freeze. I changed the oil in September and the first cup out of the oil drain was anti-freeze. I realized it needed work but was hoping it could wait till next summer when I could try to find some funds to look into the problem and in the mean time I figured I would just crack the plug on the tractor a few times this winter. So last week before moving snow I cracked the plug and to my horror I drained about a half gallon of anti-freeze before oil started coming out. So now I have a problem, I need to clean my yard (and the neighbors yard) for the remainder of the winter and have $0 to put into the tractor. Plus I am afraid to put more money into a head that had already been cracked and welded. I looked into a remanufactured head and it looks like I will be looking at about $700. The question I have is, how do I know the remanufactured head is any better than welding my existing head?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.