Posted by Stephen McCoy on December 19, 2010 at 07:32:44 from (173.27.210.76):
There seems to be some interest recently in one of my projects so I thought rather than derail someone else's thread I'd start a new one.
I have a 1945 Farmall H that I put T-20 crawler tracks on with my students back during the '05-'06 school year.
To answer some questions:
The H is complete. I could take the undercarriage off at any time, put wheels back on the axles, reinstall the steering components and have the H back as it was when I purchased it.
The tractor steers by differential braking. The original T-20 control levers are mounted to the seat frame and are linked to the brakes by 3/4" steel rods. When you pull back on a lever a brake pedal can be seen moving as the brakes activate but if you step on a brake pedal no movement is transferred back to the lever. A slot in the connection prevents this.
The 2x4's mounted on the tracks are made of HDPE plastic. There are 29 of them on each side. 4 holes were bored part way through on the bottom of each to clear the track plate bolts. 2 holes are all the way through to bolt them to the track plates and each of those holes in counter-bored for the head of a carriage bolt. 464 drilling operations in all! Actually 480 since I made 2 spare blocks with remaining material.
The blocks do help to keep the tracks from tearing up the driveway and the road but do limit some of the traction in the dirt but since it really wasn't built for pulling a plow that's ok with me.
Here's a close-up of the decals I made for it.
What weird or unique conversions have you seen or made?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.