Posted by pete 23 on July 28, 2010 at 18:48:26 from (173.87.9.228):
In Reply to: 1256D hard starting posted by geom0 on July 28, 2010 at 12:48:10:
I notice you said pump was rebuilt, if that is the case I would look for a loose screw on the delivery valve stop or sticking pumping plungers which would both fall upon the hands of who ever rebuilt the pump. Normally, hard start cold means engine or cranking problems, hard start hot, worn out pump or internal leak in pump. That screw likes to for some reason work loose, never has on one I was into but have seen it and heard of it many times on others. Of course, the stop plug needs to be replaced when ever the delivery valve is removed from rotor or it can leak even with a tight screw. Just a couple of many things that can give you a problem. Way back in about 1961, when 560's were still current new tractors, at a service school they bugged one just that way also, it started right up cool, but you could not get it to fire up when warmed up and they had much lower injection pressures than a 1256.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.