Posted by AndrewFromNS on December 05, 2008 at 16:06:42 from (71.7.194.23):
Hello All,
I've recently got around to installing an I9 Dash on my Super-C, to house my charge indicator light and hour meter. Since I don't really like the looks of the rather large, automotive-style bulb that was on the tractor when both I and the previous owner (TractorSam) purchased it, I decided that I'd do something about it. I work with LED's a lot, and figured an LED Indicator would work just wonderfully in this situation..
Looking at Bob M's wiring diagram #5, I see that I need to have a ~200mA draw across that bulb. It's my understanding that the automotive-style bulb thats in there now is one of the recommended ones thats supposed to draw about 200mA. The LED I'm working with is 25mA and 2.1V, so I calculated that I needed a 470-ohm resistor to allow the LED to survive 13.4V.
When I fired the tractor up tonight to test everything out, I noticed that, despite me throttling up to activate the alternator output, the LED stayed lit. I shut it down, and started it again, and noticed that the LED stayed lit even after the automotive-style indicator bulb had shut off.
Anyone have any helpful hints or suggestions? I like to think I'm decent with electronics, but events like this sort of leave me standing there thinking "Wha?".
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.