Farmall & IHC Tractors Discussion Board |
Re: WD6 Power Steering
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Wardner on November 24, 2006 at 15:53:44 from (206.148.20.61):
In Reply to: WD6 Power Steering posted by Tyler Cohrs on November 24, 2006 at 13:48:10:
You need to look at later W models that have power steering. Although I can't say for sure, I suspect the hydraulic drag link type power steering off a W-400/450 would work. I am not certain because I don't own a W-6. The same type of power steering is factory installed on my 650 and 660. A sensor in the drag link feels the direction of the pitman arm and opens valves to extend or retract a small bore cylinder tied to the drag link. I think utilities may have the same arrangement, but again, I don't own one. You can learn alot by walking around a salvage yard or tractor show. After you solve the actuator mystery, you will need a source of live hydraulic power. An automotive PS pump will do. One more thing. You might want to look at a power steering box out of a pickup truck. The downside of those is you will have to make mounts, shorten the column, maybe modify the pitman arm, and spend hours getting the whole apparatus to look and work well as a transplant.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|