Farmall & IHC Tractors Discussion Board |
Re: Int 2 bottom plow
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by William R Johnson on August 31, 2006 at 19:42:10 from (63.27.208.170):
In Reply to: Re: Int 2 bottom plow posted by Hugh MacKay on August 31, 2006 at 19:05:55:
Hugh I think I know what you talking about, with the long landside. I have seen this but did not know what it was called and did not ask. I will check this out futher. The 2 bottom plow I have does have a round rod bracket extenting out from the back of the second bottom. I have a tractor manual with a 2 bottom plow being atached to a 300 tractor, the photo shows a wheel on the back and the bracket looks like mine. This is how this all got started I had a wheel back in 1973 but the wheel and the plow were not attached to each other and over the years thay got futher and futher apart I think the wheel went to the junk yard and the plow stayed "out back". I will work on this some more. Thanks for all your info. Bill
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|