Farmall & IHC Tractors Discussion Board |
Putting 291 Gas Engine in 460? Tractor Vet or othe
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by migraine on January 18, 2006 at 19:42:23 from (71.197.231.212):
We took apart the 291 gas engine out of the 666 and it needs head work and new rings. Four exhaust valves were broken at the seats and bad valve guides. This head was just worked over a few years ago but I think thay had the valves set way too tight or??? Will replace the rod and main bearings and new rod bolts while we are at it. Then would like to mount in 460 Farmall that I've had setting around that I got for nothing. Question as if this will mount in there with the narrow frame and if the front cover off a 221 or 263 will interchange. Probably have to use the clutch and flywheel off the 460 right? What else have I not Thought about? Or sell the 460 with fast hitch and try to find a later model 56 or 66 series which we don't have many of around here. I need some straight talk here. You won't hurt my feelings. Migraine
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|