Farmall & IHC Tractors Discussion Board |
656 Remote Rebuilt and still Leaks
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by FormerlyPaMike on December 03, 2005 at 10:21:57 from (24.152.213.144):
I posted a while back about a leaking remote. KB- 826 told me how to rebuild the remote. I got all the parts for both remotes, and rebuilt them. I rebuilt both even though only one was leaking out the back. I was very careful and cleaned all the parts well. I put the remotes back on the tractor and cycled the loader. No leaks. Today I went out and used the loader, and now the same remote that leaked before leaks again. It didnt leak when I tilted the bucket empty, but with a load it now leaks. The other remote is fine. My dad tried to watch inside the back of the valve as I moved the valve. It appears that when there is a load in the bucket and I actuate the valve a pulse of oil runs out the back of the valve. Any idea? Questions? I have no idea.....
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|