Farmall & IHC Tractors Discussion Board |
Thanks for the picture!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Nathan in Texas on August 31, 2005 at 18:36:03 from (64.207.75.244):
In Reply to: Re: PTO Lever with PTO Shield on M posted by Nebraska Cowman on August 31, 2005 at 17:55:03:
Thanks for the picture!! That's what I needed!! I was trying to figure out how the rod would snake around the side of the PTO shield when it looks like it goes right up between the tractor and the front of the shield. I wasn't able to fit the shield up to the tractor since the rod was in the way and I thought it would fit up all the way snug against the tractor. The holes on the shield I got are drilled too far inward so I have to redrill those as well. I think mine is for an H instead of an M but otherwise it looks like it will fit right on. I think I will cut the ends of the tabs off as well. I need to pick up a few bolts for it too. Any idea what size I need? Thanks, Nathan
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|