Farmall & IHC Tractors Discussion Board |
Re: Power Steering Knuckle on M
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Harley on August 14, 2005 at 21:57:58 from (66.82.9.49):
In Reply to: Re: Power Steering Knuckle on M posted by Ernie Bob on August 14, 2005 at 19:05:26:
Yep, know what you mean. I have a loader on one and pulled the shaft completely out of the splined end. Since that was a problem that had to be cause by something, I got to looking and found the root of the trouble. The loader had worked the front bolster bolts loose and the whole front end was working forward and backward everytime I raised the loader. Fixed it. Took the front mounts of the Westendorf off one at a time, inserted a pre-drilled 1/4 inch plate between the mount and the tractor frame from the front of the bolster back about a foot and a half, did both sides, tightened the beJesus out of the bolts, added some more in the holes in the frame, and wala, no more movement. Where there's a will there's a way. Harley
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|