Farmall & IHC Tractors Discussion Board |
404 hydraulics whinning
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ih404 on May 17, 2005 at 20:48:20 from (24.217.131.141):
I just bought the tractor with a loader, about a month and a half ago. I used the tractor a couple of times before checking the hyrdo fluid level. Bought the service and operator manual, so I could possibly work on it if need be. I don"t know if it is a coincidence, but ever since I opened the filler plug to the hydraulics the pump is whinning like crazy. I have since changed the hydro filter, but now it squeals even worse than before and my hydraulics are barely working. I assume there is air in the lines because of the jerking action of the steering loader and 3pt, but I am afraid of tearing up the hydro pump since it is squealing/whinning soo loud, even though the manuals state, to run the systems 10-12 times to bleed air. This squeal/whin only happens when the hydraulics are being used with or without a load on them. Any suggestions would be greatly appreciated.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|