Farmall & IHC Tractors Discussion Board |
Sad Story
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by B Watson on March 07, 2005 at 19:37:53 from (216.168.109.177):
Last week we got about a foot of snow, took the 300U out to snowblow out the lane and once down and up again and the hydaulics gave out. Had to go warm up the Ford N to finish the job. Now that's a sad story. Anyhow, whoever gave me the advice about the worn pump shaft was dead on, the old steel framed seal had given out and scraped a good groove in the pump shaft. New seal would last about ten minutes. Took it to the machine shop today, they can chrome and grind for $80 canadian. Once I started taking her apart the bits started flying off, guess I've been looking at too many pictures of all the purty tractors, next thing ya know I find myself scraping and painting, shop is just red all over.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|