Farmall & IHC Tractors Discussion Board |
Mccormick 353 rear hydraulic lift problem
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Darrell Curtis on November 01, 2004 at 16:40:34 from (216.190.71.151):
We think this might be about a 70 something tractor. The PTO was being worked on and we drained the hydraulic oil. Completed the work and put the hydraulic oil back. Now the lift arms are real sluggish. Do not want to go up or down. They moved a very little bit with someone standing on the boxblade but not enough to be significant. Do not understand this. Prior to PTO work the lift was working. After PTO work Lift arms won't work. For some reason the cover to the shift lever was removed..we are not sure why. rock crusher spring is broken/missing. It has been missing and the lift arms were working without it. There is a stainless rod that "pops out" near the rock crusher spring when you attempt to operate the lift arms. It will not retract on it's own you have to push it back in. When you push the rod back the draft control lever slams to the foot rest. Any suggestions??? Darrell
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|