Farmall & IHC Tractors Discussion Board |
Re: 3-Point hitch . . . or not ?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ron in Nebr on October 22, 2004 at 22:10:34 from (65.172.143.197):
In Reply to: 3-Point hitch . . . or not ? posted by Eddie Kramer on October 22, 2004 at 15:13:45:
Our 484 has a 3-point. To add to what the other post says, the lower links are the heavy iron bars with pivot balls in both ends of them that are on either side of the rear of the tractor, about the same height as the drawbar. These arms are free to swing back and forth and will have a chain attachment to the center of the tractor to limit how far out they can swing. There should be a linkage going up from both of these arms to two shorter arms that move up and down via the tractor's hydraulics, which will be operated by a lever just to the right of the seat, in front of the pto lever. The top link, whether or not it's there, will have a mounting bracket in the center roughly two feet above the drawbar where a round pin about 3/4" diameter and about 5" long goes through the heim on the adjustable upper link. If you look through the photo pages on this site there's probably a picture of a 3 point there.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|