Farmall & IHC Tractors Discussion Board |
Re: 460 shifting problem
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by captaink on August 24, 2004 at 13:47:47 from (66.115.212.249):
In Reply to: 460 shifting problem posted by trickle creek on August 24, 2004 at 06:11:46:
I agree that adjusting the clutch is the first step. If that doesn’t correct it then it is possible that the original full-faced fiber clutch has been replaced with a newer “button” clutch which I believe was called a “dyna-life” clutch. This clutch lasts longer, but wears a big groove the size of the buttons in the flywheel and pressure plate. This causes drag on the clutch disc when it is released even when it is properly adjusting making it practically impossible to shift unless the tractor is still moving the same direction that it is in gear. The only solution for this is to split the tractor, take the flywheel to a machine shop and get it cut back flat, get a new pressure plate (or have it reworked by the machine shop) and then put in a new clutch disc. I haven’t tried to buy a full-faced fiber clutch for many years, but would strongly recommend going back to them in the older tractors if at all possible.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|