Farmall & IHC Tractors Discussion Board |
Re: Re: Please identify - again
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Wardner on May 05, 2004 at 16:07:30 from (63.159.104.23):
In Reply to: Re: Please identify - again posted by Eric NW Iowa on May 05, 2004 at 14:57:30:
1. The date code that I saw was on the left side of the rear frame casting. It reads *5-25-Y*. Y stands for '53. Z='54. A='55 and so on. 2. It is probably not the original engine. Both the paint and the dipstick point to that fact. The engine probably an industrial engine and may have a "U" in its serial number. It may not even have a Super H bore. Check the upper right hand side of the block for more cast codes. Look for "C-1XX". The Xs will be numbers and the complete number will give you displacement. Should be C-175. Might be C-152 which is not "SuperSized". 3. Yes, you have a belly pump. The pump gets its power from the front of the transmission countershaft. The valve, reservoir, relief valve, and pump are all in one package. It puts out about 900 PSI. Don't know gallons per minutes but it might be around 8-10. IH has an external valve which can be added to give you double acting hydraulic power. However, any four-way open center valve will work.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|