Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Super H Lift All Questions (Loader
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ross on November 25, 2003 at 20:01:10 from (208.5.57.66):
In Reply to: Re: Re: Re: Super H Lift All Questions (Loader Ins posted by Scott on November 25, 2003 at 08:28:55:
Scott, I'm going to go from the top of my head, So take this advide for what it's worth. I believe for you to add a aux resevoir to a liftall you'd want it to go from the resevoir to the liftall resevoir/belly pump out to the valve. If it were me I'd probably put a vent in the aux resevoir and feed the aux resevoir in to the lift all resevoir through the drain of the lift all. I'd then run a spool with three valves if it were me one two for the loaders and a remote while your at it. How fast this would be I don't know, also as the others said if you use double acting cylinders fluid capacity isn't as large of concern as the fluid is always in the cylinder. You might also post this question over on the implement alley and tractor talk sections as you might get some more all around hydraulic experts to weigh in. Good luck and let us know how you make out. Ross
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|