Farmall & IHC Tractors Discussion Board |
Re: Re: repairing brakes on A
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jonathan Mirgon on October 04, 2003 at 16:02:21 from (205.208.129.139):
In Reply to: Re: repairing brakes on A posted by Dave BN on October 04, 2003 at 12:31:28:
Indeed more than an afternoon job !. The brake bands that I ordered from walts tractor parts. Came with new brake rods attached.And he is right you should indeed replace the axle seals that are in the trans housing, and these can be very difficult to get out( at least in my case ) Just to add a little to the other post. Once you get the final drives off inspect your brake drums if they are badly pitted you should remove them and have a machine shop turn them, If they are not pitted and are in good shape, rough them up a bit with same sandpaper. If your changing the axle seals dont forget to drain the transmission oil first or you will have a heck of a mess. Overall the job is not hard , its just time consuming. If you have any other questions or need help drop me an e-mail at (mirgon@ohiohills.com) and I will try to help. Good luck Jon Mirgon
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|