Farmall & IHC Tractors Discussion Board |
Re: Re: THe BN is running once again.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Kevin In Michigan on October 03, 2003 at 04:39:07 from (216.120.133.178):
In Reply to: Re: THe BN is running once again. posted by Gary_N_WV on October 02, 2003 at 12:42:35:
Yes this is the same Tractor. One of the guys here on the site sent me a crank (thanks Bill)which .010 under after he had it ground. Gave me a great price and sent it up to me. The oiling problem. What I found was the orignal stud which supplies oil had been pulled out of the head. If you remember this motor is not the original but was a power unit for something else. I remade yet a longer stud and was thankfull that someone before me taped the hole very deep. I put the new stud in and used JB weld to fill in the casting where the material was gone. filed the area smooth and bolted the rocker shaft back on. Started the motor again and found the oil was coming out of each rocker arm. Have run her for about a hour now and she runs with 40 psi of oil presure. this weekend I am going to replace the gage with a original one. other then that I need to find where a little water leak is (think it is the upper hose clamp) and also I think look for a different gas tank being the eastwood sealer was not able to completly stop the leak. But over all I am very happy with how it all turned out. Must say I really want to hook onto something and pull it hard.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|