Farmall & IHC Tractors Discussion Board |
Re: Please Back Away From the Toolkit
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bf8690 on April 20, 2007 at 12:16:54 from (138.163.0.43):
In Reply to: Please Back Away From the Toolkit posted by A. Bohemian on April 20, 2007 at 11:55:16:
You're probably right that it morethan likely isn't the governor. However, the governor linkage directly controls the operation of the carb butterfly. When I got my M I didn't know if any of the adjustments were correct. After I rebuilt the motor and restored the tractor it wouldn't run right. I varified that everything was tight and that weren't any leaks. So I adjusted my governor, per the manual, and it purred like a kitten. It was however surging a little, which is what led me to the governor, as you explained. Then I did the carb modifications, because I pull mine, and it ran even better. The problem here is that he didn't really give enough info to help diagnose the issue. He asked how to do that so I told him. I figure he was asking because he had a surging/hunting issue with it, although he may not have.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|