Farmall & IHC Tractors Discussion Board |
Re: Choosing the Right Farmall
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Nat 2 on April 03, 2007 at 14:12:17 from (64.80.108.53):
In Reply to: Choosing the Right Farmall posted by Don_3400 on April 03, 2007 at 13:05:45:
A letter series won't do it for you, especially if you need to run a snowblower. Reverse is too fast and a live PTO is an absolute must-have because even with a slower reverse, you will be slipping the clutch to keep from stalling the tractor, and you can't have the snowblower stopping every time you push the clutch! The add-on 3pt is handy for lifting things, but not for "precision" work like box blading IMHO. At the very least, I would recommend as a bare minimum a 300 or 350. Utility would be better for your needs, but a Farmall will also fill the bill. Live PTO, live hydraulics, fast hitch, and TA will make the tractor so much handier than an old H or M with "stuff bolted on."
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|