DENNIS MIN
Member
All,
I'm shopping for a new metal cutting bandsaw blade.
I took a string and followed the existing blade around the wheels, with the wheels at near maximum adjustment.
I measured the string, and got 117 inches.
Is the 9 foot 6 inch blade capable of stretching that much?
I usually cut angle iron, flat iron, steel pipe, mostly for my own purposes. Mostof it 3/8 inch or less in thickness.
I think the existing blade was a combination 10/14 tooth. I measured the width of the blade and came up with 3/4 inch without measuring the teeth.
Thanks for any recommendations. I am looking for one or two blades, not a lot of them.
D.
I'm shopping for a new metal cutting bandsaw blade.
I took a string and followed the existing blade around the wheels, with the wheels at near maximum adjustment.
I measured the string, and got 117 inches.
Is the 9 foot 6 inch blade capable of stretching that much?
I usually cut angle iron, flat iron, steel pipe, mostly for my own purposes. Mostof it 3/8 inch or less in thickness.
I think the existing blade was a combination 10/14 tooth. I measured the width of the blade and came up with 3/4 inch without measuring the teeth.
Thanks for any recommendations. I am looking for one or two blades, not a lot of them.
D.